The new, Allison Transmission developed, diagnostic tool is available. The Allison Transmission Diagnostic Tool (ATDT) is a PC based, full feature diagnostic software application supporting WTEC II and WTEC III control systems. Installed on the user's own PC, it will allow the technician to acquire data from the transmission's control system and, through the use of embedded Troubleshooting Manuals, conduct systematic troubleshooting of transmission complaints. Specific features included:

• A Windows. style graphical user interface
• User selected views of multiple transmission parameters
• View Active and Historical Diagnostic Trouble Codes (DTCs)
• Graphical instrument panel view of transmission parameters
• Strip chart function
• User configurable Snapshot function
• User configurable Print function
• Code driven hotlinks to embedded WTEC II and WTEC III Troubleshooting Manuals
• Reprogramming capability (available after satisfying ATD training certification requirement)
• Demo Mode which allows the user to practice the program without being connected to a vehicle
• Paper copy of the User's Manual and laminated Job Aid Card
• Adobe Acrobat. 4.0 bundled on the CD for reading the Troubleshooting Manuals
• Microsoft Media Player. 7.0 bundled on the CD for video display PC Platform The ATDT is designed to operate on PCs with the following configuration:
• Microsoft Windows 95., Windows 98. or Windows NT. (4.0)
• 50 Mb free hard drive disk space
• 64 Mb of RAM (128 Mb for optimal performance)
• Pentium II processor
• One available COM port or parallel port (both for optimal performance)
• 800 X 600 screen resolution
• 256 color palette (set to small fonts)
• A media player program (Windows Media Player. 7.0 is provided on the ATDT CD)
• Adobe Acrobat. 4.0 (Provided on the ATDT CD) Support information The ATDT is shipped with a paper Users Manual (GN3433EN), an extensive Help Menu (within the software) as well as a laminated tri-fold Job Aid card (JA3434EN). All of these sources will guide the user through most software installation questions as well as how the tool functions. For problems relating specifically to the ATDT software, a Technical Support Help Desk phone number is provided with the ATDT. Essential Tool Status The ATDT has been classified as an Essential tool for service outlets authorized as WT Maintenance and WT Overhaul locations. Reprogramming Requirements ATDT incorporates a reprogramming function which allows modification of certain transmission control system values. Activation of this reprogramming capability requires the user to complete an Allison ATDT Service Training program to insure safe utilization of this function. The training requirement is identical to the requirement in place today to purchase the reprogramming PCMCIA card for the former diagnostic tool. Technicians who hold the appropriate training certificate today can use the same certificate as authorization to activate the reprogramming function of the ATDT. Technicians not currently certified, who wish to activate the reprogramming function of the ATDT, will be required to provide proof of completion of the ATDT Service Training Program (for course availability please contact your local Allison Transmission distributor training facility, or visit www.allisontransmission.com ). Purchasing information The Allison Transmission Diagnostic Tool, available on CD only, can be purchased through SPX/ Kent Moore using part number: J-44950 Allison Transmission Diagnostic Tool* *Note: When shipped, the ATDT is a Diagnostic Only tool. Users who wish to activate the embedded reprogramming function will be required to provide Kent-Moore with a copy of the approved training certificate, the serial number found on the CD, as well as the embedded key number found within the ATDT. Kent-Moore will then provide a one-time use password, which will activate the reprogramming function. For purchase information please contact: SPX Corporation (Kent-Moore Service Solutions) 28635 Mound Road Warren, MI 48092 Phone 1-800-328-6657 www.toolsfortrucks.com